The world's top supplier of fiber optic products
FiberYes.com is the world's top 10 in the optical fiber communication products online store. On FiberYes.com,
you can find all 10Gtek Transceivers Co., LTD factory direct DAC cables
including 10GBASE Cables such as SFP+ DAC, XFP Infiniband, MiniSAS
(SFF-8088) and CX4 (SFF-8470), and 40GBASE-CR4/SR4 QSFP+ and QSFP+ to
SFP+ (4) breakout. All of these products have passed CE, ROHS, etc., and
100% tested.
Why choose FiberYes.com?
1.Best Quality --- First-class production technology & skills
with top-clean anti-static workshop and advanced production equipment,
together with severe reliability test & quality control speak for
our best quality.
2.Lowest Price --- Mass procurement and mass production ensures low
purchase cost; improving first pass yield (FPY) and reliability decrease
after-sale cost; customized product design gives our products the
privilege of low cost and strong competitiveness.
3.Fast Delivery --- Over USD500,000 regular products in stock.
Same-day shipping is very common. Shipments are delivered by DHL, FedEx
and UPS, etc,. Fast, safe and trackable on-line.
4.Good Compatibility and Stability --- All our products have gone
through strict compatibility tests on the prevalent brands of switching
devices and router devices. This secures the products' compatibility and
stability on your devices.
5.Buy Risk-Free --- Your purchases from FiberYes.com are always
risk-free. Contact us if you are not satisfied with your purchase for
any reason. We will refund you for items sending back within 7 days
after you get them. A full refund will be given if items are returned in
their original condition.
6.Privacy --- At FiberYes.com, we understand and respect your concern
about the privacy of any information you provide at our site. Any
information collected from you are protected from betrayal to any third
parties and is for order-fulfillment purpose only.
What does FiberYes.com offer?
FiberYes.com offers DAC Twinax Cables, optical transceivers and adapters for your datacom, telecom and networking solutions:
*10GBASE SFP+ DAC, Passive & Active Cable and Module
*40GBASE QSFP+, Cable and Module
*10GBASE XFP Infiniband Cable and Module
*Internal MiniSAS (SFF-8088) Cable and Module
*CX4 Infiniband (SFF-8470) Cable and Module
10G Transceiver Series: SFP+, XFP, XENPAK, X2
SFP Transceiver Series:100M, 1.25G, BIDI, CWDM, DWDM
SDH Transceiver Series:OC3, OC12, OC48, BIDI, CWDM, DWDM
Optical Patch Cords:OM1, OM2, OM3, OS1
10GB CNA/ NIC/ HBA
Who is 10Gtek?
10Gtek Transceivers Co., LTD is a professional manufacturer
specialized in R&D, production, sales and services of DAC Twinax
Cable assembly and Optical Transceiver products include DAC twinax
cables (SFP+ Cables, QSFP+ Cables, XFP Cables, Mini SAS Cables, CX4
Cables, Infiniband Cables, QSFP+ AOC cables... ) Optical Transceivers
(SFP, SFP+, XFP, X2, XENPAK, SDH, Bidi ), OADM/MUX/Demux, Fiber Optic
Patch Cords, Fiber Optic Components, etc. The main application fields
are transmission network, data network, access network and passive
optical network (PON) of metropolitan area network, etc.
10GTEK's DAC twinax cable assemblies are available in lengths up to 15m
(50ft) to meet your network, data center, or HPC installation
requirements. All 10Gtek's cables have passed Rohs, CE. Plus, 10Gtek's
DAC twinax Cables will cross reference with ANY competing brand copper
Cable.
Relying on its sharp market insight, strong R&D capabilities and
continuous efforts, now 10Gtek has become one of the earliest suppliers
for 40G QSFP+ series. Presently, the company products cover all series
of different optical transceivers and DAC twinax high performance
(speed) cables.
10Gtek adheres to the business philosophy of "Technology Innovation,
Quality First, Continuous Improvement, Integrity and Pragmatic". Keeping
improving quality, reducing costs, shortening delivery time and
enhancing manufacturing flexibility is 10Gtek's constent pursuit.
10Gtek is committed to being a reliable partner in optical communication
and high speed data processing industry, dedicated to providing
customers with satisfactory services.
Company Goals: To be a strategic supplier in optical networking industry.
Business Philosophy: Technology Innovation, Quality First, Continuous Improvement, Integrity and Pragmatic.
Company Policy: Market leads development, Technology creates products, System makes quality, Service satisfies customers.
Company Tenet: Customer Satisfaction, People-Oriented.
10Gtek brings together a number of experts and engineers who have rich
experience in developing optoelectronic products to provide high quality
products for the rapid-growing optical communication industry. It aims
to respond quickly to customer needs, to provide customers with good
compatibility, competitive products and customization and design
services.
Nov 21, 2014
SFP Media Converters Those Support Fast Ethernet Standards| fiberyes
SFP Media Converter is a Fiber to Ethernet Media Converter
with Fast Ethernet ports, dual-rate Fast/Gigabit Ethernet ports, or
Gigabit Ethernet ports. The ports allow for flexible network
configurations using SFP transceivers. And the Fast Ethernet SFP Media
Converter uses Fast Ethernet SFPs.
According to the types of Fast Ethernet SFPs, there are corresponding kinds of Fast Ethernet SFP Media Converters. We should know the Fast Ethernet standards to understand this device.
Fast Ethernet is a collective term for a number of Ethernet standards that carry traffic at the nominal rate of 100Mbps, against the original Ethernet speed of 10Mbps. There are several Fast Ethernet standards including 100Base-T, 100Base-TX, 100Base-FX, 100Base-SX, 100Base-BX, etc.. Obviously, the "100" means 100Mbps rate.
100Base-T is an initial Fast Ethernet standard for twisted pair cables. The segment length for a 100Base-T cable is limited to 100m. 100Base-TX is the predominant form of Fast Ethernet, and runs over two wire-pairs inside a CAT5 or above cable. Since a typical CAT5 cable contains 4 pairs, it can support two 100Base-TX links with a wiring adaptor. Of the Fast Ethernet standards, 100Base-TX is by far the most widespread and is supported by the vast majority of Ethernet hardware currently produced.
100Base-FX is a version of Fast Ethernet over optical fiber. It uses a 1300nm NIR light wavelength transmitted via two strands of optical fiber, one for receive(RX) and the other for transmit(TX). 100Base-FX should use SC, ST, LC, MTRJ or MIC connectors with SC being the preferred option. However, it is not compatible with 10Base-FL, the 10Mbps version over optical fiber. A 100Base-FX SFP operates on ordinary MMF (multimode fiber) link spans up to 2km.
100Base-SX is another version of Fast Ethernet over optical fiber. It uses two strands of multimode optical fiber for RX and TX. It is a lower cost alternative to using 100Base-FX, because it uses short wavelength optics which are significantly less expensive than the long wavelength optics used in 100Base-FX. 100Base-SX can operate at distances up to 550m. It uses the same wavelength as 10Base-FL. Unlike 100Base-FX, this allows 100Base-SX to be backwards compatible with 10Base-FL. Because of the shorter wavelength used (850nm) and the shorter distance it can support, 100Base-SX uses less expensive optical components (LEDs instead of lasers) which make it an attractive option for those upgrading from 10Base-FL and those who do not require long distances.
100Base-BX is a version of Fast Ethernet over a single strand of optical fiber, while 100Base-FX uses a pair of fibers. Single-mode fiber is used along with a special multiplexer which splits the signal into TX and RX wavelengths. The two wavelengths used for TX and RX are 1310/1550nm. The terminals on each side of the fiber are not equal, as the one transmitting downstream uses the 1550nm wavelength, and the one transmitting upstream uses the 1310nm wavelength. Its transfer distances can be 10, 20 or 40 km. A 100Base-BX SFP operates on ordinary SMF (single mode fiber) single-strand link spans up to 10km.
Contraposing to these different standards, Fast Ethernet SFP Media Converters are designed with different SFP ports to support the 100Base-T SFP, 100Base-FX SFP, 100Base-SX SFP, 100Base-BX SFP and even 100Base-FX to 100Base-TX SFP transceiver which is used in the converter with two SFP ports (100Base-FX and 100Base-TX).
FiberYes supplies not only 100Base SFP Media Converters for Fast Ethernet, but also 1000Base SFP Media Converters for Gigabit Ethernet. These SFP Media Converters extend copper to fiber, multimode to multimode and multimode to single mode fiber by working with the SFP module. An extensive range of SFP Media Converters are in stock to meet every fiber conversion need.
Here are some features of FiberYes's Fast Ethernet SFP Media Converters
1. Extend Fast Ethernet network distances up to 120km
2. Support multimode and single mode fiber
3. Support SC, LC and ST fiber connectors
4. Special functions like Link Pass-Through, Far-End Fault, Auto-MDIX and Loopback
According to the types of Fast Ethernet SFPs, there are corresponding kinds of Fast Ethernet SFP Media Converters. We should know the Fast Ethernet standards to understand this device.
Fast Ethernet is a collective term for a number of Ethernet standards that carry traffic at the nominal rate of 100Mbps, against the original Ethernet speed of 10Mbps. There are several Fast Ethernet standards including 100Base-T, 100Base-TX, 100Base-FX, 100Base-SX, 100Base-BX, etc.. Obviously, the "100" means 100Mbps rate.
100Base-T is an initial Fast Ethernet standard for twisted pair cables. The segment length for a 100Base-T cable is limited to 100m. 100Base-TX is the predominant form of Fast Ethernet, and runs over two wire-pairs inside a CAT5 or above cable. Since a typical CAT5 cable contains 4 pairs, it can support two 100Base-TX links with a wiring adaptor. Of the Fast Ethernet standards, 100Base-TX is by far the most widespread and is supported by the vast majority of Ethernet hardware currently produced.
100Base-FX is a version of Fast Ethernet over optical fiber. It uses a 1300nm NIR light wavelength transmitted via two strands of optical fiber, one for receive(RX) and the other for transmit(TX). 100Base-FX should use SC, ST, LC, MTRJ or MIC connectors with SC being the preferred option. However, it is not compatible with 10Base-FL, the 10Mbps version over optical fiber. A 100Base-FX SFP operates on ordinary MMF (multimode fiber) link spans up to 2km.
100Base-SX is another version of Fast Ethernet over optical fiber. It uses two strands of multimode optical fiber for RX and TX. It is a lower cost alternative to using 100Base-FX, because it uses short wavelength optics which are significantly less expensive than the long wavelength optics used in 100Base-FX. 100Base-SX can operate at distances up to 550m. It uses the same wavelength as 10Base-FL. Unlike 100Base-FX, this allows 100Base-SX to be backwards compatible with 10Base-FL. Because of the shorter wavelength used (850nm) and the shorter distance it can support, 100Base-SX uses less expensive optical components (LEDs instead of lasers) which make it an attractive option for those upgrading from 10Base-FL and those who do not require long distances.
100Base-BX is a version of Fast Ethernet over a single strand of optical fiber, while 100Base-FX uses a pair of fibers. Single-mode fiber is used along with a special multiplexer which splits the signal into TX and RX wavelengths. The two wavelengths used for TX and RX are 1310/1550nm. The terminals on each side of the fiber are not equal, as the one transmitting downstream uses the 1550nm wavelength, and the one transmitting upstream uses the 1310nm wavelength. Its transfer distances can be 10, 20 or 40 km. A 100Base-BX SFP operates on ordinary SMF (single mode fiber) single-strand link spans up to 10km.
Contraposing to these different standards, Fast Ethernet SFP Media Converters are designed with different SFP ports to support the 100Base-T SFP, 100Base-FX SFP, 100Base-SX SFP, 100Base-BX SFP and even 100Base-FX to 100Base-TX SFP transceiver which is used in the converter with two SFP ports (100Base-FX and 100Base-TX).
FiberYes supplies not only 100Base SFP Media Converters for Fast Ethernet, but also 1000Base SFP Media Converters for Gigabit Ethernet. These SFP Media Converters extend copper to fiber, multimode to multimode and multimode to single mode fiber by working with the SFP module. An extensive range of SFP Media Converters are in stock to meet every fiber conversion need.
Here are some features of FiberYes's Fast Ethernet SFP Media Converters
1. Extend Fast Ethernet network distances up to 120km
2. Support multimode and single mode fiber
3. Support SC, LC and ST fiber connectors
4. Special functions like Link Pass-Through, Far-End Fault, Auto-MDIX and Loopback
Subscribe to:
Posts (Atom)